Premium Hot Melt Bicycle Chain Wax.
Premium hot melt chain wax loaded with nano-tungsten (WS2). Hand-calibrated in Prague for zero friction, maximum drivetrain lifespan, and an absolutely clean ride. Welcome to the solid state.
Premium Hot Melt Bicycle Chain Wax.
Premium hot melt chain wax loaded with nano-tungsten (WS2). Hand-calibrated in Prague for zero friction, maximum drivetrain lifespan, and an absolutely clean ride. Welcome to the solid state.
Paraffin, VS/LABS Proprietary WS2 Blend. Our strictly guarded laboratory formula. Heavy nano-tungsten (WS2) offers the lowest friction coefficient on the market and is demonstrably more effective than conventional Teflon. We hit the exact "sweet-spot" – the chain gets the exact maximum additive it can hold, and you get pure performance.
One step ahead of the rest of the industry. Our formula does not contain banned Teflon (PTFE) or any toxic "forever chemicals". Top performance without burdening nature.
No more pouring powders by eye. Our geometric shape guarantees precise dosing for your wax bath. Simply throw the pucks into the pot, melt and go.
Developed in Prague, rider-tested. Our lab-grade formula with nano-tungsten solves real-world cycling problems. Ditch sticky oils and experience pure science in action. No compromises.
Solid wax repels dust and dirt, which otherwise act as an abrasive paste in oil. Your chain, cassette, and chainrings will last significantly longer. You'll save thousands on maintenance.
Our nano-tungsten additive (WS2) dramatically reduces the coefficient of friction. You'll gain valuable extra watts and enjoy absolutely silent operation in all conditions.
No more dirty calves and hands from black oil. A waxed chain is dry to the touch, non-sticky, and leaves your entire drivetrain in perfect, almost laboratory-like cleanliness.
A step ahead of the industry. Our formula contains no prohibited Teflon (PTFE) or toxic "forever chemicals". Top performance without harming nature.
Absolute degreasing (Mineral Spirits + Isopropyl Alcohol)
Melting in a bath (80–85 °C)
The Dip
Cooling and breaking
Ride in absolute silence.
In dry road conditions, you can count on completely silent operation for approximately 650 to 1000 kilometers. When riding in wet, muddy, or dusty conditions (MTB/Gravel), the interval shortens. As soon as the chain becomes audible, it's time for a quick re-application. However, the advantage is that your drivetrain remains perfectly clean and does not wear down throughout this period.
Absolutely. And that applies even if you have a brand-new chain straight out of the box. Factory grease or residues of old oil would prevent the wax from adhering to the metal. We recommend a thorough bath in technical benzine followed by isopropyl alcohol (IPA) until the chain is perfectly clean.
Rewaxing takes only a few minutes. This is because there is no need for chemical degreasing. All you have to do is remove the chain, rinse it with boiling water, let it dry, and then immerse it directly back into the molten VS / Labs wax bath.
Our Tungsten Armory (6-Pack) will serve as the perfect base for creating your initial bath. This bath will last for up to two dozen dips, depending on the container used. During the season, you simply need to add a puck from our Refill pack as needed to maintain the correct level in the pot. One 6-Pack will easily cover the entire season for an average rider.
Yes, and that's where you'll notice a huge difference! Regular oil collects dust and sand, creating a black abrasive paste that destroys expensive cassettes. Our wax, once hardened, is non-sticky. Dust simply falls off, protecting components even in the most demanding conditions.
"I'm thrilled with the wax from VS/Labs, I've been waxing my chain for two years now and I can say that VS/Labs lasts a long time and is also made in the Czech Republic, which is a big plus for me."
"I mainly ride gravel, and dust was always an issue with classic lubricants – after a season, the cassette was often ruined by the abrasive paste that formed. With this tungsten wax, the dirt simply falls off. The puck application is also surprisingly foolproof and quick. For me, it's a complete game-changer."
"As a mechanic, I get enough grease on my hands during the week. On the weekend, I want a clean bike, quiet operation, and a peaceful coffee. I tried the most expensive waxes on the market, but they weren't quite right, so I developed my own. Preparing it with the pucks is trivial, the quiet pedaling is addictive, and my hand stays dry and clean at the coffee shop. I created a product I needed myself."
"As an amateur racer, every watt saved and smooth shifting under load matters to me. Switching to the tungsten blend from VS / Labs was one of the best upgrades I could have made. The drivetrain is absolutely silent, even on the steepest climbs, and runs like a Swiss watch. Pure speed without compromise."
"I used to change the cassette and chain at least once a season, which is not cheap at all with today's prices. With this wax, I've currently ridden over 4,000 km, and the chain gauge hasn't moved an inch. The investment in the wax has already paid for itself many times over in saved service costs."
"For a fixie, the drivetrain is absolutely essential. I was looking for a solution that would keep the chain clean – after all, I don't ride around town in lycra, but in jeans. With VS / Labs, the chain is perfectly dry to the touch. No more black smudges on my right pant leg, and that instant, perfectly silent feedback from the pedals is just addictive. It fits perfectly into the fixed-gear philosophy: purity and no unnecessary frills."